DIY Installation:7 Helpful Tips for Synthetic Grass Installation

Are you looking for an easy, cost-effective way to improve the value of your lawn? Why not consider installing synthetic turf and reap fruitful benefits later! Have little or no knowledge about the installation process? Learn from our step-by-step guide to laying artificial turf like a professional!

It might not be for everybody, but we have seen how synthetic turf boosted its popularity in the past few years. Even until now, it is one of the best options for residential and commercial owners to improve the appeal of their property.

Considering that you have decided to use artificial grass as a way to attract thousands of eyes, you may be worrying how to install them without breaking the bank. Well, let this synthetic grass installation guide be of great help!

Here’s how to get started:

  1. Plan the area and prepare the artificial grass.

It is advised to remove all debris and loose vegetation in the area you want to lay the turfs. Make sure the existing scatters are either removed or capped since you won’t need them again. Now, you are ready to estimate the size of the area you want to put into.

  1. Protect the synthetic turfs from weeds

Lay a piece of weed-suppressing peel over the lawn space so you can prevent weeds from growing through the grass as it leads to disfigure or buckle. With a utility knife, cut the peel into shape.

  1. Place the sub-base.

Lay and compact about 60mm of crumpled rock as your sub-base. Sprinkle some water over the crumpled rock and compact the damp base to make it firm. Make sure a fall on the base allows for drainage of water.

  1. Put the synthetic grass.

You are now ready to put the synthetic grass. Enable it to relax for many hours to get rid of creases and allow it to better settle. Cut the grass along edges, along flower beds and trees using a utility knife. The goal is to suit the area. Take enough time to guarantee a perfect finish.

  1. Secure the artificial grass

Secure the turfs’ edges with flat head nails in the rock base. Pull apart the fiber of the turf part so that the nail steps in smoothly without holding the fiber down. Make sure the nails are concealed at the end of this step.

  1. Ensure a fit artificial grass.

After stretching out the synthetic grass over the area and securing it with nails, now is time to trim excess artificial turf. It is recommended to change blades every three to five meters to make sure the blade maintains a sharp condition.

  1. Time for finishing touches.

As your last step, add and infill to keep them upright while giving you a feel of hard ground under foot. Do this by using stiff brush and blower. A lawn fertilizer spreader can also be used. For best results, brush the pile before, during and after.

When installed properly, fake grass can let you enjoy many years of useful, hassle-free and appealing lawn. Always remember that you need to prepare the underlay carefully just like the way you lay the turf. Bumps, lumps, and even sharp objects under the synthetic lawn could destroy it..

Need help? You may ask Australian Lawns to assist on the right procedure Moreover, you may also inquire for free measuring quote of fake lawns in Sydney from Australian Synthetic Lawns anytime.

As simple as that! Now, you can enjoy a lovely lawn for the years to come.



About


'DIY Installation:7 Helpful Tips for Synthetic Grass Installation' has no comments

Be the first to comment this post!

Would you like to share your thoughts?

Your email address will not be published.

© 2016 estatefiesolana.com Copyright. All Rights reserved.